基于自适应LS-SVM的柴油机废气再循环冷却控制系统设计

针对当前柴油机废气再循环冷却控制系统受到时滞问题影响,导致系统开度走势与设定走势不一致、废气再循环效果差的问题,提出基于自适应LS-SVM的柴油机废气再循环冷却控制系统;以AT89C51单片机40针作为电控单元核心部件,利用位置传感器向系统发送负载信号,利用温度传感器来传输信号并反馈至D/A转换器;在D/A转换器中,反馈信号以串行或并行方式进入寄存器,并在转换后输出电流电压,控制系统阀门在排气再循环时的开启;伺服泵采用冷却系统,为系统提供液压动力源;利用自适应LS-SVM原理计算柴油机废气再循环冷却控制目标边界值,在最小二乘支持向量机基础上,利用求解线性方程组进行优化,消除了控制误差;根据控制差的大小,调整控制系统的输出值;由试验结果可知,该系统开度走势与设定开度走势一致,且与设定开度误差为1开度,说明使用该系统具有良好稳态特性,有效克服了系统中时滞问题,废气再循环效果较好。     

Finite-time adaptive fuzzy control for a class of output constrained nonlinear systems with dead-zone

The article investigates the finite-time adaptive fuzzy control for a class of nonlinear systems with output constraint and input dead-zone. First, by skillfully combining the barrier Lyapunov function, backstepping design method, and finite-time control theory, a novel adaptive state-feedback tracking controller is constructed, and the output constraint of the nonlinear system is not violated. Second, the fuzzy logic system is used to approximate unknown function in the nonlinear system. Third, the finite-time command filter is introduced to avoid the problem of “complexity explosion” caused by repeated differentiations of the virtual control signal in conventional backstepping control schemes. Meanwhile, a new saturation function is added in the compensating signal for filter error to improve control accuracy. Finally, based on Lyapunov stability analysis, all the signals of the closed-loop are proved to be semi-globally uniformly ultimately bounded, and the tracking error converges to a small neighborhood region of the origin in a finite time. A simulation example is presented to demonstrate the effectiveness for the proposed control scheme.     

Identification and U-control of a state-space system with time-delay

This article presents a state-space model with time-delay to map the relationship between known input-output data for discrete systems. For the given input-output data, a model identification algorithm combining parameter estimation and state estimation is proposed in line with the causality constraints. Consequently, this article proposes a least squares parameter estimation algorithm, and analyzes its convergence for the studied systems to prove that the parameter estimation errors converge to zero under the persistent excitation conditions. In control system design, the U-model based control is introduced to provide a unilateral platform to improve the design efficiency and generality. A simulation portfolio from modeling to control is provided with computational experiments to validate the derived results.     

Terrain classification and adaptive locomotion for a hexapod robot Qingzhui

Frontiers of Mechanical Engineering - Legged robots have potential advantages in mobility compared with wheeled robots in outdoor environments. The knowledge of various ground properties and...     

近距离煤层综采工作面均压防灭火技术应用研究

为解决近距离煤层开采过程中上层采空区遗煤自燃导致工作面回风隅角和回风流中CO超限的问题，采用联合均压防灭火技术，通过增大进、回风巷风阻，减小两巷压差的方式，减少气体交换，抑制了上部采空区CO的逸出，同时配合注氮、堵漏和地面塌陷坑回填等综合防火技术，从源头治理了上部采空区自燃隐患，保证回采工作面的安全生产。     

State of charge estimation for lithium-ion battery based on an intelligent adaptive unscented Kalman filter

Adaptive unscented Kalman filter (AUKF) has been widely used for state of charge (SOC) estimation of lithium-ion battery. The noise covariance of the conventional AUKF method is updated based on the innovation covariance matrix (ICM), which is estimated using the error innovation sequence (EIS). However, the distribution of EIS changes due to the time-varying noise, load current dynamics and modelling error, which will lead to inaccurate ICM estimation. Therefore, an intelligent adaptive unscented Kalman filter (IAUKF) method is proposed to detect the distribution change of EIS. Then, the ICM is estimated based on the EIS after the distribution change. Results show that the IAUKF method can improve SOC estimation accuracy significantly. Compared with that of the AUKF method, the root mean squared error and the mean absolute error of SOC based on the IAUKF method decrease by 43.70% and 72.37% under random walk discharge condition, respectively. In addition, the computation time of the IAUKF method slightly increases by 6.27% compared with that of AUKF method. Finally, the effect of initial parameters on the SOC estimation accuracy was analysed. The results indicate that proper algorithm tuning, such as initial window length of EIS for ICM update and the threshold value, can further improve the SOC accuracy based on the proposed IAUKF method. The proposed IAUKF method also shows high robustness against initial measurement noise covariance.     

Filtered adaptive constrained sampled-data control for uncertain multivariable nonlinear systems

A filtered adaptive constrained sampled-data controller for uncertain multivariable nonlinear systems in the presence of various constraints is synthesized in this paper. A piecewise constant adaptive law drives that estimation error dynamics to zero at each sampling time instant yields adaptive parameters. The filtered control scheme consists of two components. Based on an estimation/cancellation strategy, a disturbance rejection control law is designed to compensate the nonlinear uncertainties within the bandwidth of low-pass filters, whereas a constraint violation avoidance control law is designed to solve an online constrained optimization problem. Although a reduced sampling time helps to minimize the estimation error caused by the neglect of unknowns, the resulting aggressive signals put more restrictions on the control law. Greater sacrifice of tracking performance is required to satisfy the constraints. The constraints violation avoidance control law is in favor of a larger sampling time. Sufficient conditions are given to guarantee the stability of the closed-loop system with the sampled-data controller, where the input/output signals are held constant over the sampling period. Numerical examples are provided to validate the theoretical results, comparisons between the constrained sampled-data controller and unconstrained adaptive controller with the implementation of different sampling times are carried out.     

Adaptive fuzzy control for nontriangular form systems with time-varying full-state constraints

This article investigates an adaptive fuzzy tracking control problem for a class of nontriangular form systems with asymmetric time-varying full state constraints. Unknown functions are approximated by the fuzzy logic systems. A domination approach is employed to tackle the nontriangular form structure. Time-varying asymmetric barrier Lyapunov functions (ABLFs) are adopted to ensure full-state constraints satisfaction. Based on the backstepping technique and time-varying ABLFs, an adaptive controller is proposed and guarantees that all the signals in the closed-loop system are ultimately bounded and the time-varying full state constraints are met. Simulation examples are presented to further demonstrate the effectiveness of the proposed approach.     

Disturbance observer-based adaptive boundary iterative learning control for a rigid-flexible manipulator with input backlash and endpoint constraint

In this article, an observer-based adaptive boundary iterative learning control law is developed for a class of two-link rigid-flexible manipulator with input backlash, the unknown external disturbance, and the endpoint constraint. To tackle the backlash nonlinearities and ensure the vibration suppression, the disturbance observers based upon the iterative learning conception are considered in the adaptive boundary control design. A barrier Lyapunov function is incorporated with boundary control law to restrict the endpoint state. Based on the defined barrier composite energy function, the tracking angle error convergence of the rigid part is guaranteed, and the vibrations of the flexible part are suppressed through the rigorous analysis. Finally, a numerical simulation is provided to illustrate the effectiveness of the proposed control.     

基于 MPDE-EEMD 及自适应共振解调的轴承故障特征提取方法

针对滚动轴承振动信号具有非线性、非平稳性和非高斯性,并且故障特征往往淹没于系统噪声之中而难于识别的问题, 提出了以多种群差分进化(multiple population differential evolution, MPDE) 算法来改进集合经验模式分解( ensemble empirical mode decomposition, EEMD) 的 MPDE-EEMD 消噪方法,并与自适应共振解调技术( adaptive resonance demodulation technique, ARDT)相结合实现故障特征提取。 首先,为了解决 EEMD 中加入参数依靠人工选择且难以准确获取的问题,建立极值点分布 特性评价函数,利用 MPDE 来寻优获取最佳白噪声幅值,实现 EEMD 自适应分解。 然后,采用峭度与相关性相结合的准则对分 解后的 IMF 分量进行自动筛选,将满足条件的有效信号进行重构,实现对原始振动信号的降噪处理。 最后,采用 ARDT 自动确 定对消噪信号进行带通滤波的带宽和中心频率,再通过包络解调提取出滤波信号的特征频率。 将轴承仿真故障信号与实际故 障信号用于算法的验证,结果表明 MPDE-EEMD+ARDT 能有效提取出轴承故障特征。